Diese Seite ist noch nicht übersetzt – sie wird angezeigt auf: English.
Date and time
The Date and time tab sets how the clock keeps and shows the time. Set the Time zone first. With Automatic time from the internet on, the clock then keeps the exact time, including daylight saving changes. The clock switches it on by itself when you connect it to Wi-Fi through the setup page.
Basic settings
| Setting | Options | What it does |
|---|---|---|
| Time on the clock | – | The date and time the clock is showing now |
| Automatic time from the internet | On / Off | Takes the time from internet time servers and corrects it every 30 minutes. Needs a working Wi-Fi connection. Off from the factory, switched on when you connect the clock to Wi-Fi through the setup page. |
| Time format | 12-hour / 24-hour (default 24-hour) | 12- or 24-hour display. The same setting as holding ⊕ for 3 seconds. |
| Time zone | list of time zones (default UTC) | Your local time zone. |
| Daylight saving time | Automatic / Always standard time / Always daylight saving time (default Automatic) | Automatic follows the daylight saving rules of the time zone. The other two always show standard time, or always daylight saving time. |
Whether the hours show a leading zero (09:15 or 9:15) is set in Display.
Note
Changing the time with the buttons switches Automatic time from the internet off, so the next sync does not overwrite your time. Switch it on again here.
Set the time manually
These cards are shown only while Automatic time from the internet is off, for example when the clock has no internet access.
- Use the time of this browser – one tap sets the clock to the time of your phone or computer.
- Enter date and time – pick a date and time and send them to the clock. The time is taken as the local time of your phone or computer.
After a manual sync, the clock shows the time according to its Time zone setting, so check that the time zone is correct.