Tato stránka zatím nebyla přeložena – zobrazujeme ji v jazyce: English.
Date & Time
The Date & Time tab sets how the clock keeps and shows the time. Set the Time Zone first, then switch on Auto Sync: the clock then keeps the exact time from the internet, including daylight saving changes.
Basics
| Setting | Options | What it does |
|---|---|---|
| RTC date/time | – | The date and time the clock is showing now |
| Auto Sync | On / Off (default Off) | Takes the time from internet time servers and corrects it every 30 minutes. Needs a working Wi-Fi connection. |
| Time format | 12H / 24H (default 24H) | 12- or 24-hour display. The same setting as holding ⊕ for 3 seconds. |
| Leading zero | On / Off (default On) | Off leaves the first hour tube dark before 10 o'clock, for example 9:55 instead of 09:55. |
| Time Zone | list of time zones (default UTC) | Your local time zone. |
| Daylight Saving | Auto / Winter / Summer (default Auto) | Auto follows the daylight saving rules of the time zone. Winter always shows standard time, Summer always daylight saving time. |
Note
Setting the time with the buttons switches Auto Sync off. Switch it on again here.
Manual clock sync
These cards are shown only while Auto Sync is off, for example when the clock has no internet access.
- Sync from browser time – one tap sets the clock to the time of your phone or computer.
- Sync time manual – pick a date and time and send them to the clock. The time is taken as the local time of your phone or computer.
After a manual sync, the clock shows the time according to its Time Zone setting, so check that the time zone is correct.