Tato stránka zatím nebyla přeložena – zobrazujeme ji v jazyce: English.
Modes
The Modes tab chooses between the clock and a countdown, and what each tube shows.
Master mode
- Clock (default) – shows the time.
- Counter down – counts down to a date and time you choose.
The cards below change with the mode.
Clock format
Clock format shows the current format. To change it, type a new one into New clock format and confirm.
The format has one character per tube, read from the left. The separator tubes take a : or . character, so the separators must stand on the separator tubes:
| Clock | Default format | Separator tubes |
|---|---|---|
| Puri 6 | HH:mm:SS |
3rd and 6th character |
| Puri 4 | HH:mm |
3rd character |
| Code | Shows |
|---|---|
HH |
hours |
mm |
minutes |
SS |
seconds |
dd |
day of the month |
MM |
month |
yy / yyyy |
year, 2 or 4 digits |
doy |
day of the year (001–366) |
ds, cs, ms |
tenths, hundredths, thousandths of a second |
0–9 |
this digit, always |
- |
this tube stays dark |
: |
separator tube, both dots (blinking as set in Display) |
. |
separator tube, one dot |
Examples for Puri 6:
| Format | Shows |
|---|---|
HH:mm:SS |
21:45:08 |
dd.MM.yy |
11.10.26 |
HH:mm:-- |
21:45 with the seconds tubes dark |
Counter down
Set the target in New counter down date/time; the time is taken as the local time of your phone or computer. Counter down date/time shows the current target, and New counter down format sets what the tubes show, with the same codes as the clock format.
The countdown stops at zero and stays there; the clock gives no signal. With the default format the countdown shows hours, minutes and seconds, so it suits events less than a day away.