Manuals
EN

Set up over USB

Connect the clock to this computer with its USB cable and click Connect. Every change is saved in the clock straight away – these are the same settings as in the clock’s own menu.

Not connected

The clock is not in the list?
  • In the browser window, choose the clock’s port – depending on the clock and the computer it is called e.g. “USB Single Serial”, “USB Serial Device” or “Blub-Clock” – and click Connect.
  • Use the USB cable that came with the clock – some cables only charge and do not carry data.
  • Windows 10 and 11, macOS and Linux include the driver. On older Windows, install it first: WCH CH9102, FTDI
  • Close other programs that talk to the clock (such as a serial terminal).
  • If the clock is in Configuration mode, return it to Time mode first (parameter 0, or unplug it for a moment).

Time

Clock --:--:--
This computer --:--:--

Display

Time format
Transition
Faster Slower 3

Brightness

Night mode

Tube test

Lights the chosen digit, so you can check each one.

Communication log