Night mode
The Night mode tab sets the brightness of the tubes, and a lower brightness for the night.
Settings
| Setting | Options | What it does |
|---|---|---|
| Night mode | Off, On (central), On (per day) | Off: one brightness all the time. On (central): the same night hours every day. On (per day): different night hours for each day of the week. |
| Brightness in day mode | 5–100 %, default 100 % | Brightness outside the night hours. With night mode off, the card is called Brightness. |
| Brightness in night mode | 5–100 %, default 100 % | Brightness during the night hours. |
| From / To | whole hours, default 22:00 – 06:00 | Start and end of the night. |
Brightness changes show on the tubes straight away; the switch between day and night happens within 10 seconds of the set hour.
Night hours
- The night starts at the full hour From and ends at the full hour To. It may run past midnight, for example 22:00 – 06:00.
- If From and To are the same, the night never starts.
- On (per day): each day's hours apply to that calendar day. Monday 22:00 – 06:00 dims the display on Monday from midnight to 6:00 and from 22:00 to midnight. Tap Copy Monday to all days to use Monday's hours for the whole week.